Skip to main content

1-23911-K087

FireBeta XT+ Extinguishing Control Panel (4 Zone / 1 Area)
  • EN12094-1, EN54-2 and EN54-4 approved
  • Four detection zones and 1 extinguishing areas as standard
  • Dual configurable extinguishing outputs as well as first and second stage sounder outputs
  • First and second stage potential free changeover contacts
  • Agent released and common fault potential free contact
View all

At a glance

General

The FireBeta XT (4 Zone / 1 Area) is a single-area extinguishing control panel complying with EN12094-1, EN54-2 and EN54-4. It offers 4 detection zones for controlling 1 extinguishing area.
The extinguishing area has a comprehensive set of inputs and outputs and is configurable via a simple programming interface. It may have up to 7, serially connected status indication and control units connected via a simple 4 core cable.
The versatility of the control panel may be further enhanced by the fitting up to 7 ancillary or sounder boards to the RS485 serial bus.

Details

  • EN12094-1, EN54-2 and EN54-4 approved
  • Four detection zones and 1 extinguishing areas as standard
  • Dual configurable extinguishing outputs as well as first and second stage sounder outputs
  • First and second stage potential free changeover contacts
  • Agent released and common fault potential free contact
  • Programmable extinguishing delays and output duration
  • Extract fan control
  • A countdown indicator shows the time in seconds until release
  • Mode select and manual release controls
  • Monitored remote inputs for manual release, hold, mode select (door interlock), released pressure switch, and low pressure switch
  • Monitored abort input
  • Serial connection for status units and ancillary boards

Technical specifications

General
Status indicaton
LEDs & countdown timer
Compatibility
Status unit/Ancillary board connection
Connectivity
Two wire RS485
Communication ports
1
Maximum system capacity (device count)
up to 128
Network size (nodes)
up to 8
Electrical
Power supply type
230 VAC
Power consumption
100 W (max)
Operating voltage
28 VDC ±2 V
Current consumption
0.095 A
Mains supply fuse 1.6 A
Power supply rating 3 A
Maximum ripple 200 mV
Zone
Maximum zone capacity
up to 4
Operating voltage
21 to 28 VDC
Quantity of devices per zone
32 (max) type dependent, typically 20
Cable rating
0.5 mm² to 2.5 mm² solid or stranded wire, FP200 or equivalent (max capacitance 1µF max inductance 1 mH)
Quiescent current 2 mA (max)
Termination 6k8 ½ W
Thresholds Normal, 10 to 2 kΩ
Thresholds Detector alarm, 1000 to 390 Ω
Thresholds Manual call point alarm, 370 to 150 Ω
Thresholds Short circuit, 130 to 0 Ω
Input
Input quantity
4
Input type and rating
SIL, AL, FLT, RST switched -ve 100 Ω
Programmable
Yes
Termination
6k8 ½ W
Thresholds Normal, 10 to 2 kΩ
Thresholds Alarm, 2000 to 150 Ω
Thresholds Short circuit, 140 to 0 Ω
Output
Output quantity
13
Output type and rating
Output specific
Fire alarm signalling
1 A @ 30 VDC
Fault signalling
1 A @ 30 VDC
Notification
1 A @ 21 to 28 V
Auxilliary power
500 mA @ 24 V
Programmable
Yes
Termination
Output specific
Output type and rating Local fire relay, 1 A @ 30 VDC
Output type and rating 1st stage relay, 1 A @ 30 VDC
Output type and rating 2nd stage relay, 1 A @ 30 VDC
Output type and rating Extract fan, 1 A @ 30 VDC
Output type and rating Extinguishing release, 1A @ 21 to 28 VDC
Output type and rating Status unit, 500 mA @ 21 to 28 VDC
Extinguishing release delay 0 to 60 s (5 s steps)
Extinguishing release duration 60 to 300 s (5 s steps)
Termination Notification, 10K ¼ W
Termination Extinguishing, 1N4004
Standby battery
Capacity
2 x 12 V, 7 Ah
Charging
0.7 A @ 27.6 VDC (temperature compensated)
Batteries supported in housing
2
Type Yuasa NP SLA
Battery fuse 3.15 A
Battery current 3 A (max)
Physical
Form factor
Wall mount
Physical dimensions
385 x 520 x 110 mm
Net weight
8 kg
Colour
Grey
Mounting type
Wall mount
Material Mild sheet steel (1.2 mm)
Finish Epoxy powder coated
Colour code BS 00 A 05
Terminal capacity 12 AWG
Environmental
Vandal proof
No
Environment
Indoor
IP rating
IP30
Regulatory
Compliancy
REACH
RoHS 2
WEEE
Certification
EN12094-1
EN54-2
EN54-4

Downloads

All downloads

Datasheet

Other EU certificate

Certificates

If available, the downloads of the Certificates, Software & Firmware and Media are displayed in their default language.