Skip to main content

1-23911-K090

FireBeta XT+ Extinguishing Control Panel (8 Zone / 4 Area)
  • EN12094-1, EN54-2 and EN54-4 approved
  • Eight detection zones and 4 extinguishing areas as standard
  • Dual configurable extinguishing outputs as well as first and second stage sounder outputs for each area
  • First and second stage potential free changeover contacts for each area
  • Agent released and common fault potential free contact per area
View all

At a glance

General

The FireBeta XT (8 Zone / 4 Area) is a multi-area extinguishing control panel complying with EN12094-1, EN54-2 and EN54-4. It offers 8 detection zones for controlling 4 extinguishing areas.
Each extinguishing area has a comprehensive set of inputs and outputs and is configurable via a simple programming interface. All extinguishing areas may have up to 7, serially connected status indication and control units connected via a simple 4 core cable.
The versatility of the control panel may be further enhanced by the fitting up to 7 ancillary or sounder boards to the RS485 serial bus.

Details

  • EN12094-1, EN54-2 and EN54-4 approved
  • Eight detection zones and 4 extinguishing areas as standard
  • Dual configurable extinguishing outputs as well as first and second stage sounder outputs for each area
  • First and second stage potential free changeover contacts for each area
  • Agent released and common fault potential free contact per area
  • Programmable extinguishing delays and output duration
  • Extract fan control
  • A countdown indicator shows the time in seconds until release
  • Mode select and manual release controls per area
  • Monitored remote inputs for manual release, hold, mode select (door interlock), released pressure switch, and low pressure switch
  • Monitored abort input
  • Serial connection for status units and ancillary boards

Technical specifications

General
Status indicaton
LEDs & countdown timer
Compatibility
Status unit/Ancillary board connection
Connectivity
Two wire RS485
Communication ports
1
Maximum system capacity (device count)
up to 256
Network size (nodes)
up to 8
Electrical
Power supply type
230 VAC
Power consumption
100 W (max)
Operating voltage
28 VDC ±2 V
Current consumption
0.095 A
Mains supply fuse 1.6 A
Power supply rating 3 A
Maximum ripple 200 mV
Zone
Maximum zone capacity
up to 8
Operating voltage
21 to 28 VDC
Quantity of devices per zone
32 (max) type dependent, typically 20
Cable rating
0.5 mm² to 2.5 mm² solid or stranded wire, FP200 or equivalent (max capacitance 1µF max inductance 1 mH)
Quiescent current 2 mA (max)
Termination 6k8 ½ W
Thresholds Normal, 10 to 2 kΩ
Thresholds Detector alarm, 1000 to 390 Ω
Thresholds Manual call point alarm, 370 to 150 Ω
Thresholds Short circuit, 130 to 0 Ω
Input
Input quantity
4
Input type and rating
SIL, AL, FLT, RST switched -ve 100 Ω
Programmable
Yes
Termination
6k8 ½ W
Thresholds Normal, 10 to 2 kΩ
Thresholds Alarm, 2000 to 150 Ω
Thresholds Short circuit, 140 to 0 Ω
Output
Output quantity
13
Output type and rating
Output specific
Fire alarm signalling
1 A @ 30 VDC
Fault signalling
1 A @ 30 VDC
Notification
1 A @ 21 to 28 V
Auxilliary power
500 mA @ 24 V
Programmable
Yes
Termination
Output specific
Output type and rating Local fire relay, 1 A @ 30 VDC
Output type and rating 1st stage relay, 1 A @ 30 VDC
Output type and rating 2nd stage relay, 1 A @ 30 VDC
Output type and rating Extract fan, 1 A @ 30 VDC
Output type and rating Extinguishing release, 1A @ 21 to 28 VDC
Output type and rating Status unit, 500 mA @ 21 to 28 VDC
Extinguishing release delay 0 to 60 s (5 s steps)
Extinguishing release duration 60 to 300 s (5 s steps)
Termination Notification, 10K ¼ W
Termination Extinguishing, 1N4004
Standby battery
Capacity
2 x 12 V, 7 Ah
Charging
0.7 A @ 27.6 VDC (temperature compensated)
Batteries supported in housing
2
Type Yuasa NP SLA
Battery fuse 3.15 A
Colour Code BS 00 A 05
Battery current 4 A (max)
Physical
Form factor
Wall mount
Physical dimensions
385 x 700 x 145 mm
Net weight
8 kg
Colour
Grey
Mounting type
Wall mount
Material Mild sheet steel (1.2 mm)
Finish Epoxy powder coated
Terminal capacity 12 AWG
Environmental
Vandal proof
No
Environment
Indoor
IP rating
IP30
Regulatory
Compliancy
REACH
RoHS 2
WEEE
Certification
EN12094-1
EN54-2
EN54-4

Downloads

All downloads

Datasheet

Other EU certificate

Certificates

If available, the downloads of the Certificates, Software & Firmware and Media are displayed in their default language.